Garage Door Jerks When Closing

Why does my garage door jerk when closing? Is there any way to prevent this condition? Many people face this problem and keep asking how to fix it. A lot of things can be blamed for such a condition that includes bad rollers, bent tracks, and a problem with the door opener. You will have to fix it as soon as you notice the issue. Otherwise, you might need to spend much more on the replacement. In this article, we will discuss both causes and solutions.

Garage Door Jerks When Closing

Your garage door has three main parts. The door opener, door springs, and your garage door. The door opener comes with a lift motor that lifts and lowers the door. This motor makes your garage door to work smoothly.  The door runs on a track system that ensures closing and opening.


Jerking can be due to the track system. It might be damaged or affected by dirt and dust. The alignment needs to be proper to ensure flawless operation. You can inspect the track system to rule out the possibility of dirt accumulation. 

How to Fix it 

While inspecting the track system, you might notice dents or bends. These are caused by overuse or dirt deposits. If the damage is minor, you can use a mallet or hammer to straighten out the system. However, you will have to fix your garage safely and correctly. Any mistake will worsen the condition. When the damage is severe and you think that you cannot handle it, take the help of a professional. The issue might seem minor and repairable, but if you try to fix without skill and the right tool, you might damage it permanently. When the issue is caused by simple dirt deposits, you can clean it. Remove the track system and use a clean cloth to wipe it. It will prevent your garage door jerking. 

Garage Door Roller

The garage door roller can also cause jerking. If you notice any sound while operating the garage door, then the roller might be the culprit. You can replace the roller or fix it depending on the condition.

How to Fix it

You cannot fix the roller on your own. You will need professional help to know the severity of the damage. In most of the cases, they might ask you to replace the roller. Before the replacement, you will have to check that the hardware is in working conditions. Check the hinges and screws. These parts might be responsible for jerking. When they are not in good condition, they cannot support the weight of the garage door and you might experience jerking. 


Now you know why your garage door jerks when closing. Go through the condition and possible causes. If you find that you cannot fix it on your own, you can take the help of professionals.  They are experienced and can offer you a cost-effective solution. If you try your own without skills, you might end up damaging your garage door more. Besides, you can injure yourself and your family during the process. So, act smart and take the right decision.